colormag domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/reviewer4you/public_html/blog.reviewer4you.com/wp-includes/functions.php on line 6121
Nice work! I recently installed a Dual AV receiver in my 2001 Sierra, now I have good guidance for installing the backup camera. I used the Metra dash trim kit for the double din chassis, using a 3/4" hole saw, to remove the radio basket. No need to fight with rivets, no need to mess with the dash support.
Awesome video
strong rim lighting makes this guy look like a serial killler though
]p
not bad but i would consider putting a hole in the cab, using a grommet and silicone seal the slack in the hole from the rca end. may also be a good idea to wrap it in a wire loom and seal it with tape so the wire doesn't wear. no doubt his way will work though. personally i wanna do it once and forget it. i'm really here to confirm what i thought about drawing power off the reverse lights.
Can the camera be turned on with out being put into reverse?
can you hook it to the touch screen that already comes with the truck?
Great video, very informative. One question, do you have to connect a little power wire that’s coming off of the video RCA do anything in the back of the truck? I realize you have to connect it for a live feed from your head unit wire harness but what about the other end in the back?
The pink wire is in the dash what does it say does it say break bro ? Or does it say reverse
I know quite some time has gone by since you made this but if you’re still wondering where the rust came from I think I know where. It’s most likely from the cab vents you ran the wiring through. The rubber flaps on them dry out over time and are unable to create a good seal letting water in. Running wires through only makes the problem worse. This usually leads to the rockers rusting from the inside out. The parts are kind of expensive considering what they are, and are not easy to replace. Not only are they kinda hard to get to but I believe they can only be purchased through the dealer which is probably why so many trucks are driving around with this problem. I would advise replacing the vents and taking the wiring all the way under the truck to the engine bay then finding an access point to the dash through the firewall.
Hello, I followed all the instructions in the video but I still cant get it to work. Everytime I put the car into reverse the screen goes black and I get a yellow exalmation point on the screen. I rechecked all the connections a few times I can not figure it out. If anyone is able to help or shed some light it would be greatly appreciated. Thanks
Hey my name is David and I live in new jersey as well I was wondering if the camera is still holding up after all this time I'm contemplating getting one for my single cab sort bed 06 1500 manual
NICE VIDEO THAT WAS WHAT I WAS LOOKING FOR
Very informative and well done, we will be at CES please subscribe to us.
Why does my backup camera not work when headlights are on but when. Headlights are off it works
Where does the rear end of the red wire in the video cable get connected?
So the camera is on all the time, but the head unit only displays the image when it sees a reverse signal
Where did you take that white wire from?
Distance line doesn't work on these unit
just lost the holeeeee part we’re u hide the wire from the license plate to the back of the cockpit like we’re did u hide it at 😂
Great video. I've been watching all your videos about the atoto to prepare myself with the installation when it comes in. Can't wait! I have a question, could i tap in the same reverse wire if I'm using 2 different reverse Camara at the same time? I want to use my atoto and my lcd display rear view mirror to work at the same time. Thanks!